USED MACHINES

ROOT Horizontal Boring Machine Model D360 – USED

• Motor driving power – 10HP,3PH, 230/440v) 1750rpm

• Feed motor – 3HP,3PH Hydraulic 1200rpm

• 4 Spindles with Jacobs Chucks 0 – ¼” capacity

• 1 Spindle with Forest City Tool Head – 3 spindles on 1” and ¾” Centers

• Size of working table - 15" X 80"

• Serial number - 7314

 PRICE FOB Jackson, MS.......................$        3,300.00

EDGEBANDER

HOLZ-HER Edgebander Model 1435SE / PLC GENESIS – USED

 (Gluing, end trimming, flush trimming up to 8mm)

• For edgestrip thickness 0.3 - 8 mm,

• feed speed 11 m/min.

• 230 V  60 HZ  3 Phase           

• Weight 2486 lbs. 

Model 1901 Edgestrip Magazine                                                                                          

• Fully automatic for edges coiled or in strips with selector switch (coil or strips)

• Execution with heavy‑duty edgestrip guillotine (up to 3 mm thick PVC)  

Model 1906M Gluing Station – “Cartridge System”

• Application through nozzle for work pieces, 6-45mm high.

• Manual refill. 

Model 1913 Pressure Unit                                                                                                     

• With large electronically-driven roller synchronized with feed speed,

• 2 additional pressure roller to achieve high gluing pressure and precise banding

• Quick adjustment of pressure section to edge thickness 

Model 1976K End‑Trim Unit, 8 mm                                                                                       

• Two high frequency motors for trimming leading and trailing ends with draw cuts

• Motors mounted on unipoint axis enabling quick change for chamfer trimming up to 15°

• Connected power 2 x .22 KW (.30 HP), Speed 9000 RPM

• For edge thickness up to 8 mm    

Model 1942M Flush‑Trim Unit                                                                                             

• With Combination Cutterhead

• For chamfering and flush‑trimming 0.3 - 8 mm and radius up to 3 mm

• Chamfer tilt 0° - 15°

• Horizontal and vertical copy rollers

• Connection to central extraction

• With 2 HF trimming motors and tools w/tracing

• 2 x 0.6 KW (.80 HP)  300 HZ    18000 RPM   

Model 1929 Scraping Unit

• Finish and remove marks created by top, bottom and radius units on thick PVC edgings                                   

Model 1941-K Buffing Unit                                                               

• Incorporate plunge control to avoid rounding over the leading and trailing edges, and ensure tight corners

• For cleaning and edge chamfering with 2 cloth wheels, tilting scope 5°

• 230 V   60 HZ                                                

•  Length    3680mm (145”)

• Width      1020mm (40”)

• Height     1200mm (47”)

Price FOB Brooksville, MS...........................$ 11,500.00

SCMI EDGEBANDER

• MODEL- BASIC 2 B
• 230 VOLT 3 PH
• 5/16 MAX. EDGE CAP.
• 140mm Min.PANEL WIDTH & 200mm Min. LENGTH
• AUTOMATIC STRIP & COIL FEED MAGAZINE
• HEAT UP TIME 10Min.
• 1.2mm CAP. GUILLOTINE
• 3 ROLL PRESSURE UNIT
• DOUBLE MOTOR END TRIM 0.3hp.-12,000rpm
• TOP & BOTTOM TRIMS 0.8hp-12,000rpm
• OPEN SPACE FOR ADD. WORKSTATION
• TOP& BOTTOM BUFFING 0.33hp - 2,800rpm
• 41fpm FIXED FEED SPEED, 1hp DRIVE
• 3KW FREQUENCY CONVERTER

PRICE FOB JACKSON, MS …………………$ 8,800.00

JOINTER

 used not available

new see LOBO

return to top

MOULDER

MATTISON Moulder Model 276

6" x 4" capacity; 4 heads, leg bed feed, wired 230/3/60......$ 5,900.00

PLANERS 

POWERMATIC Planer 24" "The Quiet One" Model Q225 - USED

                - Complete with 36 HSS Knives

                - Sectional Infeed

                - Sealed Ball Bearing Cutterhead

                - Bed - 24" x 48"

                - Motor - 15HP

                - 3PH, 230/460V Wired for 460V

                - Variable speed feed range - 20FPM to 100FPM

                - Stock thickness range 1/8" to 8"

                - Widest planable stock - 24"

                - Serial Number 8224037

                - Floor space required - 48" x 70"

PRICE FOB Noxapater, MS.............................………………………$      3,500.00

 return to top

• NO Router

• Mounted on fabricated steel base (Whirlwind) with

• MDF extension table

• Working height: 37”

return to top

return to top

SANDER, WIDE BELT

CEMCO Wide Belt Sander 37" Model 3337 Series 3000 3 Head - USED

•        Abrasive Belt  37” x 103”

• §       Working Height – 6”

• §       Bad Belt Compensating Device

• §       CEMCO “Lectric Eye’ Tracking

• §       Dust Tite Electrical Enclosures

• §       Infee/Outfeed Spring Loaded Pinch Rolls

• §       Automatic Emergency Stop

• §       Load Meters on Main Drive Motors

• §       Torsion Resistant Tubular Frame

• §       Variable Speed Conveyor

• §       Five Ton Capacity Jacks Support Bed

• §       Belt Tensioning Ram – Air Operated

• §       Anti-Kickback Fingers

• §       110 Volt Control Circuits

• §       Thickness Adjustment – in Thousandths of Inch

• §       Motorized Thickness Adjustment

• §       Motorized Thickness Indicator

• §       Infeed/Outfeed Conveyor Extension

• §       Constant Pass Line

• §       Adjustable Contact Heads

• §       Motors  - 40HP, 30HP, 30HP, 3PH, 440V

• §       Total CFM – 11340

• §       Net Weight – 11,900 lbs

PRICE FOB Jackson, MS.........………........…....….$     22,000.00

-  

LOBO Wide Belt Sander 15” Model CA-1554 - USED

 -           Sanding Width – 15”

-          Sanding Belt Size - 15" x 54"

-          Conveyor Size - 15" x 64"

-          Min. Working Length - 12"

-          Max. Working Thickness – 6”

-          Feeding Speed - 20 FPM

-          Sanding Motor - 7 1/2 HP

-          Feeding Motor - 1/2 HP

-          Air Requirements - 6 CFM

-          Net Weight – 840 lbs

PRICE FOB RUSTON, LA…………………………………………..$ 2,725.00

return to top

UNIQUE Double Spindle Cope Machine Model 310 USED 

• Sliding table w/automatic lock
• Cuts multiple work pieces up to 6" wide x 27” long in one pass
• Safety pneumatic clamps (2) lock work in place until sliding

table is returned to its forward position

• Motors (2) 5HP, 3PH, 230/460V
• Magnetic starters
• 100 PSI air required
• Two counter-rotating cutter heads eliminate tear-out on detail edge of cope cuts
• Individual dust collection hoods and guards on each cutter head
• Spindle (2)  1-1/4"
• Tooling not included
• Shipping weight - 800 lbs.

PRICE FOB Jackson, MS.............................……………………………….....$     8,450.00 

return to top

       TYLER French Dovetailer 36" - #3018U……….......AS IS .....…….......………… $ 7,500.00

  return to top

December 16, 2011